Every developer asks the same first question about a walkthrough film: what will it cost? The honest answer is that a film is scoped to the project, not picked from a shelf. Two projects with the same number of towers can need very different effort, because the work depends on what the camera sees, how closely, and how many times the plan changes along the way.
This guide lists the drivers that decide the cost of a 3D walkthrough film, explains how each one adds or removes work, and shows how to brief so that you pay for the shots that sell, not for rework. It contains no figures on purpose. Your quote is based on your drawings and your launch brief, and any number printed in an article would mislead you.
If you want the basics of the format first, read the 3D walkthrough animation service page. To see how the stages run, read our process.
Film length and the number of shots
Length is the most visible driver, but shots matter more than seconds. A long, slow shot across one facade takes less production time than many short shots that each show a different space, because every new space has to be modelled, lit and checked.
A useful way to think about it is in scenes. An arrival sequence, a tower facade, an amenity deck, a clubhouse interior and a landscape walk are five scenes. Each carries its own modelling and lighting work. A film with more scenes, or scenes that change time of day, needs more production time even if the total running time is the same.
How to brief well: list the scenes you actually need, in the order a buyer would experience them. Mark the two or three that must be spectacular and the ones that can be quick. Tell us where the film will play, because a lounge screen can carry a longer film than a social ad.
Scale and complexity of the project
A single villa and a township are different jobs. Scale decides how much geometry is built, how much landscape is planted and how many tower types have to be modelled. Repeating towers are efficient, because one model is placed many times. Unique towers, each with its own facade, are not.
Complexity also covers the unusual: curved facades, double-height lobbies, terraced gardens, intricate screens and jaali work. These are worth doing when they define the project’s look. They cost effort when they appear in distant views where nobody can see them.
How to brief well: tell us which tower types repeat and which are unique. Point out the signature elements that need close-ups, so detail is spent there and not evenly across the whole model.
Level of detail in each shot
Detail is not one setting. A wide aerial needs correct massing, roads and greenery, but not individual door handles. A lobby shot needs materials, furniture, lighting fixtures and reflections to be believable. The closer the camera, the more the film has to hold up.
Interiors and amenity spaces are usually the most detailed part of a film. A clubhouse, a sample flat or a lounge needs finishes, furniture layout and décor choices made before it can be built. Exteriors at distance are lighter on detail, but landscape, water features and people add their own work.
How to brief well: say which shots are close and which are distant. Share finish references, such as marble type, wood tone, facade colour and fixture style, so we do not build two versions to find the right one. Where a space is undecided, tell us, and we can show it at a lower level of detail rather than invent finishes you have not chosen.
Drawing readiness
This is the quiet driver that changes the cost of a project more than any other. A film is built from approved drawings. When plans, elevations, sections, landscape layouts and material schedules are complete and consistent, modelling is direct. When they are still moving, the model has to move with them.
Late changes are the expensive kind. A facade change after the colour draft means rebuilding geometry that was already approved and then re-lighting it. A change to tower height after camera paths are locked changes the paths as well.
How to brief well: share what you have, and say honestly what is still open. Send drawings in a single, versioned folder and name the version that is final. If the architect is still revising the lobby, ask us to plan that scene last so the rest of the film can move forward. Our 3D walkthrough service is built around the approval stages for exactly this reason.
Revisions and approval rounds
Every project has three review stages: a grey clay model for geometry and camera angles, a colour draft for materials and lighting, and the final. Each stage is a chance to correct the film, and each correction has a cost that grows as the stage advances. A camera angle changed at clay stage is a small edit. The same change at final stage means re-rendering.
The number of revision rounds is agreed in the quote. What matters in practice is how feedback arrives. Comments from five people in five emails are harder to resolve than one consolidated list, and conflicting comments cost a round to untangle.
How to brief well: name one person who owns approvals. Collect comments from your sales, marketing, architecture and management teams into a single list before it comes to us. At clay stage, check geometry and camera paths. Hold your opinions on colour and mood for the draft stage, where they belong.
Formats and deliverables
A master film is one deliverable. Cut-downs for YouTube, vertical clips for social, a looping version for a lounge screen, separate stills and thumbnails are others. Each version needs editing, sound decisions, end cards and export.
Aspect ratio matters too. A horizontal film does not become a good vertical clip by cropping, because the framing was composed for a wide screen. If vertical is a requirement, shots are planned for it from the start.
How to brief well: list every destination at briefing. If you only decide to run ads after the film is done, the cut-downs become extra work and some shots may not crop well. Telling us early lets one set of camera moves serve several outputs.
Landscape, people, vehicles and atmosphere
Landscape is a large part of a residential film. Trees, lawns, water features, pathways and street furniture make a project feel real, and they take time to place correctly. Buyers also look for life: people, children, cyclists, vehicles. These are added for mood and scale, and they are the reason renders should carry an artist’s impression note.
Time of day and season are part of the mood. A film that moves from day to dusk shows more of the project, and also needs more lighting setups.
How to brief well: share the landscape drawings and say what mood you want. Choose the time of day for each scene deliberately, instead of asking for all of them everywhere.
Sound, voice-over and titles
Music, ambient sound, a voice-over and on-screen titles are decisions of their own. A voice-over in more than one language multiplies the editing work. Titles and legal lines need space on screen and review time.
How to brief well: decide early whether the film is silent for a lounge screen, music-led, or narrated. Send the text for titles and the artist’s impression wording in one document, approved by whoever signs off marketing material, so no end card has to be redone.
Deadline and schedule
A fixed launch date sets how many things must happen at once. When the schedule is comfortable, scenes flow through modelling, lighting and rendering in order. When it is tight, work runs in parallel, which needs more people and tighter coordination, and leaves less room for rounds of feedback.
Schedule and feedback speed are linked. A film paused for a week while approvals are pending does not keep its slot in the production plan.
How to brief well: give us the date the film is needed, and also the date the first stills are needed, because hoardings and brochures usually come first. Agree review dates in advance and keep them. Fast feedback is the most reliable way to protect a deadline.
A short briefing checklist
If you remember only one section, use this list. Send it with your drawings and the quote request.
- The launch date and the date each asset is needed.
- The scenes you need, in order, with the two or three hero moments marked.
- Where the film will play and in which versions.
- Drawings in a single folder, with the final version named, and any open items listed.
- Finish and landscape references.
- One named approver, and the dates of the review rounds.
- Wording for artist’s impression notes, titles and end cards.
How the quote is built
With this information, a quote reflects real scope: the scenes, the detail, the readiness of drawings, the review rounds, the formats and the schedule. That is also why we ask to see your drawings before quoting. A figure given without them is a guess, and a guess tends to move.
When you are ready, send your brief through the quote form and we will reply with scope and schedule. If you would like to see how a project moves from clay model to final, read the process page. If you are comparing formats first, the pillar guide to 3D walkthroughs for real estate developers explains how films, flythroughs, renders and 360 views fit together.